ACFM - AMIGO Software

ASSIST

ASSIST (ACFM Software Suite for the Inspection of STructures) is the software of choice for ACFM inspection with the AMIGO. ASSIST is the most fully featured software within the ASSIST family of products supporting all standard and array probes in a variety of configurations.

Click to View Larger Image

ASSIST Array Features

ASSIST supports ACFM array probes through a number of easy to use views and program features, for example,

  • Surface map views available as coloured contour maps to provide an overview of large inspected areas.
  • Supports array probes for inspection of wide 2D surfaces or multiple regions at the same time (e.g. weld toe+cap+HAZ).
  • Supports non linear defect orientations i.e. transverse and diagonal defects.
  • Supports position feedback data (common on ACFM arrays), providing defect length estimates automatically.

Standard Features

Many other features come as standard with the ASSIST family of software.

Some of these are outlined below:

  • Data is displayed real-time allowing defect detection immediately.
  • Crack sizing produces both length and depth results.
  • Provides professional inspection reports of inspection data and results.
  • Inspection and results can be annotated for auditing and further analysis.
  • Supports and records the positions of multiple defects per scan.
  • Contains full online illustrated user manual and procedures.
  • Provides colour region marking for anomalous areas (e.g. seam welds, undercuts).
  • Supports simple manual ACFM probes as well as arrays.

Crack Detection / Products / AMIGO / Software / ASSIST    1 2 3 4 Next