|
ACFM
Products - AMIGO
Features
Overview
The AMIGO
instrument offers the following:
- Rugged site unit, rated to IP54.
- Reliable crack detection and sizing (length and depth).
- Quick change battery pack capable of approximately 10 hours
operation on a single charge.
- Reduced component cleaning requirements with no need to clean
to bare metal.
- Capable of inspection through thin metallic coatings, or through
non-conducting coatings up to 10mm thick.
- Buttons for RUN / STOP and MARKERS on the instrument. Optionally
available on larger probes enabling one man operation in difficult
access
areas.
- Dual frequency capability:
- 5kHz (Standard instrument for optimum performance on
ferritic steel).
- 50kHz (Additional option for improved sensitivity particularly
on non-ferrous metals).
- Access to a wide range of geometries using TSC's range
of active topside probes.
- Intelligent probes to simplify operation.
- Rapid area scanning using multi-sensor array probes.
- WindowsTM based
software for ease of operation and compatibility with other
Windows applications.
Comparison
The AMIGO instrument has all
the advantages of ACFM inspection available on previous TSC site
instruments, but in a smaller, lighter package and a longer battery
life.
Versatility
is further increased with the added benefit of support for array
probes.
Crack
Detection / Products / AMIGO
/ Features 1 2
3 4
5 6
7 8
Next
|